BASE24 classic relies heavily on XPNET for auditing transactions and does not have a mechanism of his own for tracing.
BASE24-eps , when running on HP NSK (tandem) also relies on this auditing mechanism but also has an extra tracing mechanism where, if enabled, shows the steps taken while processing transactions.
In this article we will deal with the auditing mechanism of XPNET , which is used by both BASE24 classic and BASE24-eps, and in another article we will discuss the BASE24-eps tracing mechanism, with some explanations.
First part, audits on XPNET.
In XPNET, audits can be enabled and configured at different levels.
We will start with node level audit configuration.
A node configuration in XPNET looks like this
31 > info n NP^NODE, detail
NODE: NP.NP^NODE ENABLED
PROGRAM NP.$NEAPAY.XPNET.NETWORK
HOMETERM
PPD $B10N STARTUP COMMAND
CPU 0 BCPU 2
PPRI 155 BPRI 180 UDFAIL OFF
BACKUPTYPE HOT HIGHPIN ON BRETRYDELAY 0
EXTPAGES 24000 PFS 512 MAXPROMSG 4096
MED 30 MAT 60% DEBUG OFF
QED 30 SINTERVAL 0 QUETHRESHOLD 100
X25TRUNKDEL 120 OSIENABLE OFF
LOGNQAT 0 LOGNQMT 0 LOGNQMI 0%
LOGEQAT 0 LOGEQMT 0 LOGEQMI 0%
UDQAT 0 UDQMT 0 UDQMI 0%
USQAT 0 USQMT 0 USQMI 0%
MORE>>> 32 +
NODE: NP.NP^NODE
EXTSWAP
SWAP
MONNOM ON MONQAT ON MONSTATES ON
DD 30 STD 30
SERVERCLASS SERVER-NCPI-10 PATHMON $B1PM
NOMPAGES 2048 CJPAGES 2048
NOMA NOMB
NOMC NOMTODISK OFF
CJA $NEAPAY.B10NCJA CJB $NEAPAY.B10NCJB
CJC $NEAPAY.B10NCJC CJ ON
LOGFILE $CB24 ALTLOGFILE $0
STARTOPTIONS NP.$NEAPAY.B24EXEC.L1CONF
MORE>>> 32 +
NODE: NP.NP^NODE
PAYLOADPAGES 0 PAYLOADTIMEOUT 200 MSGPRIORITY 0
MSGTIMEOUT OFF MAXLARGEMSGSIZE 0
MEMFRAGPAGES 1600
MORE>>> 32 +
NODE: NP.NP^NODE
AUDITA $NEAPAY.B24TRACE.N10AUDC
AUDITB $NEAPAY.B24TRACE.N10AUDA
AUDITC $NEAPAY.B24TRACE.N10AUDB
ADEXTENT 128 ADMAXEXTENTS 100
LASTAT OFF SASTAT OFF
AUDIT OFF AUDITIO NOWAIT
REALTIMEAUD ON
AUDERROR CONTINUE ON AUDIT SWITCH ERROR
MORE>>> 32 +
NODE: NP.NP^NODE NODEABNORMAL ON NODEAVAIL OFF
NODECONFIG OFF NODEDEBUG ON NODEDIAG ON NODEINFO OFF
NODEOTHER OFF NODETHRESHOLD ON NODEUNAVAIL OFF
LINEABNORMAL ON LINEAVAIL OFF LINECONFIG OFF LINEDEBUG ON
LINEDIAG ON LINEINFO OFF LINEOTHER OFF LINESUPP ON
LINETHRESHOLD ON LINEUNAVAIL ON
STAABNORMAL ON STAAVAIL OFF STACONFIG OFF STADEBUG ON
STADIAG ON STAINFO OFF STAOTHER OFF STASUSPENDED ON
STATHRESHOLD ON STAUNAVAIL OFF
PROABNORMAL ON PROAVAIL OFF PROCONFIG OFF PRODEBUG ON
PRODIAG ON PROINFO OFF PROOTHER OFF PROTHRESHOLD ON
PROUNAVAIL OFF
LINKABNORMAL ON LINKAVAIL OFF LINKCONFIG OFF LINKDEBUG ON
LINKDIAG ON LINKINFO OFF LINKOTHER OFF LINKTHRESHOLD ON
LINKUNAVAIL OFF
32 >
